The Listening Nest Box

The Listening Nest Box

A camera and a microphone in an ordinary tit nest box, a Raspberry Pi 5 that watches both, and a phone that buzzes when somebody moves in. Everything runs at home. The only thing that leaves the house is one picture per visit, which the box publishes itself, and that part can be switched off in a single line.

This box has never received a firmware update from any agency. As far as we know.

A red nest box with a blue roof on a wooden post outside, partly hidden behind a railing and fig leaves
The finished nest box, mounted outside.

What it does

Status: installed in October 2026 and running through the winter. Since November the box uses a detection model trained on its own visitors, see Detection. Real nesting results will follow in spring, so the results page is honest about being short for now.

How the pieces fit

camera + IR light (inside the box)
        |
   Raspberry Pi 5  --  USB microphone (outside)
        |   \
        |    +-- BirdNET-Pi: bird songs, web interface
        |
   MediaMTX  -- RTSP / WebRTC stream
        |
        +-- watch.py: motion -> bird check -> webhook + report
        |                                  |
        |                           Home Assistant
        |                            |        |
        |                   push message   dashboard tile
        |
   Home Assistant camera -> HomeKit -> iPhone / Apple TV

Read on

Principles

Licence and credits